Additionally, the RGB & Fan Controller has two RGB channels on them, so try switching your RGB devices to the other available channel (or swap the connectors if you have RGB devices occupying both connectors). If your RGB products are not visible in our CAM software and not lighting up, reconnect them to the controller to verify connectivity. Next, please verify if your RGB products are recognized under the RGB & Fan Controller in CAM (example found below). If this does not work, try connecting the cable to a different port on your power supply. To do so, firstly reconnect the SATA power connector connected to your PSU. Now you will want to make sure your controller is receiving power for your RGB products. If the controller is not visible in our CAM software, this is likely the cause of your issue, please refer to our article on this issue, My CAM Powered Device Is Not Recognized. If you are having problems with this product and your RGB fans are not lighting up, this article will help you troubleshoot this.įirstly, prior to any troubleshooting, please verify if your controller is recognized by our CAM software.
0 kommentar(er)
